September 2009 Gallery

      Volvo N10       Michael Rauwerda

        Home made Garwood GC-2 dump body with working tailgate release. Opening doors w/old style 3 pc hinges. Fully functional hood assy. Hand pinstripped cab & hood. Old style steel dash.     John

      Mack B-815 dumptruck using all A.I.T.M. resin parts.       Bob Monahan

                  Built using A.I.T.M. products.      Bob Monahan

        I would like to thank Hank Suderman for taking the pictures of my models at the ATHS Brooks Truck show.     Terry Williams

              Was a Ford F 8000 short hauler...the frame was shortened...a shorter flat bed replaced the van delivery box...side bracket was mounted to carry chains, either mud/snow chains or a tie down chain.      Don Parrish

        It's a 1/24 peterbilt 378 I built. It was bought off a guy from hong kong on ebay. The paint is krylon yellow and purple. This is my best built so far and i hope to get better. Details were added like a blanket in the sleeper, fifth wheel grease made out of vasoline and food coloring, truck paper and diesel power magazine and a taylor swift poster in the back of the sleeper.     Travis Ladobruk

          Revell/Germany 359 Pete. Built to be a Harley Davidson Transporter, plans for the trailer are in the works. Truck wheel base has been stretched, resin 495 super singles casted by Monkeyclaw Models. Rivers edge resins ext hood custom fenders (Claton Shepard Master). Breahers by Jami (Moluminum). Built with 3406 Cat, with 5 & 4. Detailed off white and orange interior, with extended twin sticks, bare metal foiled instrument panel and detailed gauges.    Budd Ricker

          Peterbilt 377 raised roof 63in unibilt. Streatched frame resin 2 hole rear wheels and aftermarket tires from Jamie (moluminum). Signature 600 cummins by Auslowe Paint is duplicote space blue, white interior.      Budd Ricker

          38 ft box trailer that I finished building. It is shown hooked to a GMC Cannonball and a H-67 Mack.     Gary Akers

                I completed "Spider Mike" this time. The scale is 1/25.  The cab is made by the resin of the garage maker called "Frank Gortsema". The chassis of the donor did not employ "Diamond Leo" daringly and used it because there was the thing of "White western star" of the junk. I did not see the engine, but rode NHC-250 of Cummins of the junk too. The front wheel used the thing of the la france fire engine, and the rear wheel used the thing of the double in '27 of Traimobile. A trailer is a bare composing type of Moving van of traimobile, but cuts a fender part straight. A wheel reproduces five hole wheels of Peerless logging trailer in polypate. I took the photograph of the two-shot with "pig pen" which I produced before. "Pig Pen" produced decare this time, too, and a deal improved. It is to build "Bear" becoming smart in a sandwich afterward.       Hiroshige Yamamoto

  Autocar DC mixer done after an actual company that ran in Utica, NY in the 1970's thru 90's.       Rype

          Peterbilt 378 Twin-steer wrecker that I just finished. The first 2 photos are my next project.    Tim Ahlborn

          It's the 1991 re-issue of the Mack R kit.      Ray DeJesus

          He is my flatbed. loadedwith a 20ft container on it. the straps used are believe it or not but flat shoe laces work well for strapping.       Pete Black

                          single axle dodge I just did and a new flatbed, inside rail flatbed.  These 2 models were done on board the ship I work on which a pic is included.       Pete Black