December 08 Gallery

                            BJ and the Bear rig, AMT Kenworth, AMT Great Dane trailer, scratchbuilt reefer unit.  Robert Eller

                  Here is my Andy's Oilfield hauling Kenworth T800.   The jeep and lowboy trailer will not be staying on this truck.  My build of my P-tank trailer will.  Lots of kit bashing parts from alot of kits and scratch building to make this Andy's truck.   Chris Schaper

          I built a Kenworth T800 and quickly put together a standard 40ft flatbed after looking at it, I needed to update the trailer to go with the truck.  So I built a 41ft spread axle flatbed.  I used a standard AMT kit, streached it to 1/25th scale 41ft, shaved the frame rails to put a arch in her back used the kit axles and gear for the spread axles after a little customizing, got a couple AITM 36ft tool boxes and mounted them in between the tires.  Made some mudflaps added her coil load.  William Saunders

                  379 Peterbilt custom made; visor, bumper, wing, and stack shields.  Brl rear fenders.  Mack superliner day cab dump trailer.  AIMT cab guard and decals.  Mike ODell

                  James

          359 1983 with 3408 Candy Red 315WB     JP

      1955 Mack B-61 265 inch wheel base, air ride suspension, 48" sleeper.  Dave Natale

        This was a Ford short hauler, the van body was removed, the winch/oilfield package was built from scratch...the winch line can be wound up or let out...the truck roller is for easier winching the trailer onto the fifth wheel...the suspension on the trailer is functional.  Don Parrish

          Mack R685ST from AMT with "Roadway" outfit.  Bernard Segerer from Germany

      GMC Astro, modifications include conversion to a daycab, detailing the air brake system, making the steer axle operate, and adding functioning cab lift cylinders, the mirrors are from an old Titan kit.  Ray DeJesus

              GM, none of these trucks are stock, especially the grey 4 door. The red and grey trucks are Chevy Bisons and the green truck is GMC General.      Sean Duffy

  I've add hydro lines and "greased" it up a bit (after all it is a mechanics truck), added a hydro filter also, no decals as I didn't get any with it.  If anybody has some from the kit I'd love to have them.  Leo Vanderstelt

        The first one is the Revell Bussing 8000 truck and trailer, I found a picture on the web that I liked and painted it to match, it's built box stock.  I was at the hospital sitting with my wife in her room building sub assemblies on these two then came home and painted them.  The GMC astro was built using what was left from the GMC General that I built, I put the air ride suspension wheels and tires from the general on it and the grain trailer was cut down from an AMT trailer then I scratch built the hopper bottoms and tarp.  Lonnie Barnett

      Jamie & Ron

    Mariano Quiroz

    This truck is a Revell W-900 KW with an extended frame.  I added about 6 inches to the stock frame. The rear drive rims and tires are from Plaskit. The rear rims and tires had to be modified to work with one another. Other Plaskit items include the glad hands and trailer light connection on both the tractor and the trailer. The pusher axel is from CFC. The rims and tires for the pusher axel are from the parts bin. The fenders for the pusher axel were made by Plowking Industries. I made a rear panel for the tractor from styrene. The trailer is the AMT Peerless log trailer with rims and tires from the parts bin.  Justin Sorrentino

      Dodge I700, added crhome buds and tanks from an Int Louie, chequerplate, suzis, 1/4 guards from and 1 10 Volvo plus a few other small odds and ends.  Danny Turner

              Hiroshige Yamamoto from Japan